HP LaserJet M4345 HP LaserJet M4345 MFP - User Guide - Page 194
FAIL To continue touch OK, X PERMANENT STORAGE FULL - mfp reset to factory default
View all HP LaserJet M4345 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 194 highlights
Table 11-1 Control-panel messages (continued) Control panel message Description Recommended action 66.XY.ZZ OUTPUT DEVICE FAILURE An error occurred in an external paperhandling accessory. 1. Turn the MFP power off. 2. Check that the accessory is properly seated on and connected to the MFP, without any gaps between the MFP and the accessory. If the accessory uses cables, disconnect and reconnect them. 3. Verify that there is no packaging material in or around the output device. 4. Turn the MFP power on. 5. If this message persists, contact an HP-authorized service or support provider. (See the HP support flyer, or go to http://www.hp.com/support/ ljm4345mfp.) 68.X PERMANENT STORAGE FULL To continue touch OK The MFP NVRAM is full. Some settings saved in the NVRAM might have been reset to the factory defaults. Printing can continue, but some unexpected functions might occur if an error occurred in permanent storage. Touch OK to clear the message. If the message is not cleared, turn the MFP off, and then turn the MFP on. If this message persists, contact an HPauthorized service or support provider. (See the HP support flyer, or go to http://www.hp.com/support/ljm4345mfp.) 68.X PERMANENT STORAGE WRITE FAIL To continue touch OK The MFP NVRAM is failing to write. Printing can continue, but some unexpected functions might occur if an error occurred in permanent storage. Touch OK to clear the message. If the message is not cleared, turn the MFP off, and then turn the MFP on. If this message persists, contact an HPauthorized service or support provider. (See the HP support flyer, or go to http://www.hp.com/support/ljm4345mfp.) 68.X STORAGE ERROR SETTINGS CHANGED To continue touch OK One or more MFP settings are invalid and have been reset to the factory-default settings. Printing can continue, but some unexpected functions might occur if an error occurred in permanent storage. Touch OK to clear the message. If the message is not cleared, turn the MFP off, and then turn the MFP on. If this message persists, contact an HPauthorized service or support provider. (See the HP support flyer, or go to http://www.hp.com/support/ljm4345mfp.) 69.X ERROR To continue turn off then on A temporary printing error occurred. Turn the MFP off, and then turn the MFP on. If this message persists, contact an HPauthorized service or support provider. (See the HP support flyer, or go to http://www.hp.com/support/ljm4345mfp.) 79 ERROR To continue turn off then on A critical hardware error occurred. Turn the MFP off, and then turn the MFP on. If this message persists, contact an HPauthorized service or support provider. (See the HP support flyer, or go to http://www.hp.com/support/ljm4345mfp.) 182 Chapter 11 Problem solving ENWW