HP LaserJet Pro M11-M13 Getting Started Guide - Page 1
HP LaserJet Pro M11-M13 Manual
View all HP LaserJet Pro M11-M13 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 1 highlights
2 LaserJet Pro M11-M13 series Getting Started Guide IMPORTANT: First, follow Steps 1 - 3 on the printer hardware setup poster, then continue with Step 4. www.hp.com/support/ljm11-m13 www.register.hp.com 4. Set up the Control Panel At the printer control panel, check the LED status before beginning software installation. English 1 Français 4 Español 7 Português........ 10 13 16 5. Select a connection method U SB connection directly between the printer and the computer Use an A-to-B type USB cable. Windows 1. For Windows 7 or earlier, do not connect the USB cable before installing the software. The installation process prompts to connect the cable at the appropriate time. If the cable is already connected, restart the printer when installation prompts to connect the cable. 2. Continue to "6. Locate or download the software installation files." NOTE: During software installation, select the option to Directly connect this computer using a USB cable. Mac 1. Connect the USB cable between the computer and the printer before installing the software. 2. Continue to "6. Locate or download the software installation files." Perform a wireless installation (M12w wireless models only) Before starting the installation, verify that the wireless access point is working correctly. Make sure that the printer, router, and computer are all turned on and that the computer is connected to the same wireless network that the printer will be connected to. If there is not a solid blue light on the top of the printer, go to Process A. If there is a solid blue light on the top of the printer, go to Process B. Process A 1. Place the CD in the CD-ROM drive, and then click Install. When the Printer connections dialog appears, choose Configure to print over the Wireless Network. 2. Follow the on-screen instructions. Process B 1. Place the CD in the CD-ROM drive, and then click Install. When the Printer connections dialog appears, choose Connect to a configured Wireless Network printer. 2. Follow the on-screen instructions. 3. Select the printer detected by the software. If the printer cannot be detected by the installer, manually input the printer's IP address to continue the installation. NOTE: Print a configuration page to find the printer's IP address. At the printer control panel, press and hold the Cancel button for 5 seconds, and then release the Cancel button to print the configuration page. The IP address is listed on the configuration page in the Network Information section. Manually configure the IP address See the printer user guide for information on how to manually configure the IP address www.hp.com/support/ljm11-m13. 1