HP LaserJet Pro MFP 4101-4104dw Reference Guide 2 - Page 5
Help and tips for Wi-Fi and connectivity
View all HP LaserJet Pro MFP 4101-4104dw manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 5 highlights
English Help and tips for Wi-Fi and connectivity If the software is unable to find your printer during setup, check the following conditions to resolve the issue. Potential Issue Solution Printer Wi-Fi setup mode timed out If the Wi-Fi light on the control panel is not blinking blue, the printer might not be in Wi-Fi setup mode. Restart Wi-Fi setup mode: 1. On the control panel, select Setup > Network Setup > Restore Network Settings. The wireless light will begin blinking. 2. Wait for one minute. Open the printer software and try connecting again. Computer too far from printer Move your computer closer to the printer. Your computer might be out of range of the printer's Wi-Fi signal. Computer connected to a Virtual Private Network (VPN) or remote work network Disconnect from a VPN before installing HP printer software. Connect to the VPN again after finishing printer setup. Note: Consider your location and the security of the Wi-Fi network before disconnecting from a VPN. Wi-Fi turned off on computer (computer connected by Ethernet) If your computer is connected by Ethernet, turn on the computer's Wi-Fi while setting up the printer. Help and Support For printer troubleshooting and videos, visit the HP support site. hp.com/support/ljmfp4101-4104 The information contained herein is subject to change without notice. 5