HP LaserJet Ultra MFP M134 Getting Started Guide - Page 1

LaserJet Pro MFP M129-M132, LaserJet Ultra MFP M133-M134 Getting Started Guide English 1 Français 5 Español 10 Português 15 IMPORTANT: Follow Steps 1 - 3 on the printer hardware setup poster, then continue with Step 4. www.hp.com/support/ljM129MFP www.register.hp.com 4. Set up the control panel At the printer control panel, check the display status before beginning software installation. 5. Select a connection method U SB connection directly between the printer and the computer Use an A-to-B type USB cable. Windows 1. Do not connect the USB cable before installing the software. The installation process prompts to connect the cable at the appropriate time. If the cable is already connected, restart the printer when installation prompts to connect the cable. 2. Continue to "6. Download and install the software." OS X 1. Connect the USB cable between the computer and the printer before installing the software. 2. Continue to "6. Download and install the software." Wired (Ethernet) network connection (optional) Use a standard network cable. 1. Connect the network cable to the printer and to the network. Wait a few minutes for the printer to acquire a network address. 2. Continue to "6. Download and install the software." Wireless network connection (wireless models only) Touchscreen control panels 1. To connect the printer to a wireless (Wi-Fi) network, on the printer control panel, touch the Wireless button. 2. Touch Wireless Menu, and then touch Wireless Setup Wizard. Select the network name from the SSID list, or enter the network name if it is not listed. 3. Use the keyboard to enter the passphrase, and then touch the OK button. 4. Wait while the printer establishes a network connection. 5. On the printer control panel, touch the Network button. If an IP address is listed, the network connection has been established. If not, wait a few more minutes and try again. Note the IP address for use during software installation. Example IP address: 192.168.0.1 2-line/LED control panels 1. To connect the printer to a wireless (Wi-Fi) network, make sure that the printer, access point, and computer are turned on and that the computer is connected to the wireless network. 2. A USB cable might be required during software installation. 3. To print from a computer, continue with "6. Download and install the software." To print from a phone or tablet only, continue with "7. Mobile printing (optional)." Manually configure the IP address See the printer user guide for information on how to manually configure the IP address www.hp.com/support/ljM129MFP. 1