HP Latex 310 Site preparation guide Latex 3x5
HP Latex 310 Manual
 |
View all HP Latex 310 manuals
Add to My Manuals
Save this manual to your list of manuals |
HP Latex 310 manual content summary:
- HP Latex 310 | Site preparation guide Latex 3x5 - Page 1
HP Latex 300 Printer Series Site Preparation Guide - HP Latex 310 | Site preparation guide Latex 3x5 - Page 2
The only warranties for HP products and services are set forth in the express warranty statement accompanying such products and services. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for technical or editorial errors or omissions contained herein - HP Latex 310 | Site preparation guide Latex 3x5 - Page 3
Table of contents 1 Overview ...1 Introduction ...1 Documentation ...1 Customer responsibility ...1 Installation time schedule ...2 2 Site preparation requirements ...3 Physical space requirements ...3 Unloading route ...3 Environmental specifications ...4 Ventilation ...4 Air conditioning ...4 - HP Latex 310 | Site preparation guide Latex 3x5 - Page 4
iv ENWW - HP Latex 310 | Site preparation guide Latex 3x5 - Page 5
The following manuals are provided with your printer, and can also be downloaded from http://www.hp.com/go/ Latex300/manuals/: ● Introductory information ● Limited warranty ● Legal information ● Site preparation guide (this guide) ● Assembly instructions ● User's guide Customer responsibility - HP Latex 310 | Site preparation guide Latex 3x5 - Page 6
Installation time schedule Allow a minimum of three hours for the installation. The installer may require the help of three people to perform certain tasks during installation. 2 Chapter 1 Overview ENWW - HP Latex 310 | Site preparation guide Latex 3x5 - Page 7
) Height with packaging 1239 mm (48.8 in) Weight with packaging 290 kg (639.3 lb) 335 Printer 2561 mm (101 in) 840 mm (33.07 in) 1380 mm (54.3 in) 188 kg (110 in) 765 mm (30.1 in) 1239 mm (48.8 in) 304 kg (670.2 lb) 365 Printer 2561 mm (101 in) 840 mm (33.07 in) 1380 mm (54.3 in) 207 kg (456.4 - HP Latex 310 | Site preparation guide Latex 3x5 - Page 8
location, water from the atmosphere can condensate on the printer parts and cartridges and can result in ink leaks and printer errors. In this case, HP recommends that you wait at least 3 hours before turning on the printer or installing the ink cartridges, to allow the condensate to evaporate. In - HP Latex 310 | Site preparation guide Latex 3x5 - Page 9
Service the printer or replace printer components ● Ensure the printer is well ventilated Your printer has the following dimensions: Printer physical specifications 315 Printer hp.com/go/latexrips for a complete list of certified RIP stations available for this printer remote support, the printer - HP Latex 310 | Site preparation guide Latex 3x5 - Page 10
window, or in the HTTP part of the Advanced settings window. or Internet Service Provider. printer and should be available on the day of installation: ● Six HP 831 ink printer requires the following electrical components to be supplied and installed by the customer, according to the Electrical Code - HP Latex 310 | Site preparation guide Latex 3x5 - Page 11
Code requirements of the local jurisdiction of the country where the equipment is installed. The printer requires two power cords that meet the following requirements. Dedicated lines per SKU HP Latex 365/375 HP Latex 335 HP Latex 315 Printer Curing Printer Curing Printer Curing - HP Latex 310 | Site preparation guide Latex 3x5 - Page 12
to meet the power requirements of the printer, and should be in accordance with the Electrical Code requirements of the local jurisdiction of the HP-approved power cord. NOTE: You need two power cords from the tables below. HP Latex 335/365/375 Printers-Power cord specifications Country HP part - HP Latex 310 | Site preparation guide Latex 3x5 - Page 13
NEMA 6-20P, 240 V, 20 A, non-locking International 8121-1287 2.5 m IEC 60309, 240 V, 16 A, 2L +PE HP Latex 315 Printer-Power cord specifications per region Country HP part number Length Plug type Plug America Region Argentina 8121-0925 2.5 m IRAM 2073 Brazil Chile, Uruguay 8121-1101 - HP Latex 310 | Site preparation guide Latex 3x5 - Page 14
HP Latex 315 Printer-Power cord specifications per region (continued) Country HP part number Length Plug type Plug Korea, Indonesia 8120-6352 2.5 m CEE 7-VII India 8121-1074 2.5 m IS 1293 Taiwan 8121-1033 4.5 m CNS 690 Hong Kong, Singapore 8121- - HP Latex 310 | Site preparation guide Latex 3x5 - Page 15
HP Latex 315 Printer-Power cord specifications per region (continued) Country HP part number Length Plug type Plug U.K. 8121-0907 2.5 m BS 1363/A (13A fused) Middle East 8120-6360 2.5 m NEMA 6-20P, 240 V, 20 A, non-locking Appliance coupler (printer Code requirements of the - HP Latex 310 | Site preparation guide Latex 3x5 - Page 16
electrician aware of all requirements and specifications highlighted in this guide? (Required) Is the single-phase line voltage inside cord plug type provided by HP? (Required) Are the wall receptacles (wall sockets) and electrical installation suitable for the printer's rated current ? NOTE: - HP Latex 310 | Site preparation guide Latex 3x5 - Page 17
your RIP? Do you have a LAN cable long enough to connect the printer to the network? Yes No Comments Environmental requirements Have the temperature and humidity substrate and ink cartridges to be available on the day of installation? Have you met the requirements specified in this guide? No (
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
 |
 |
HP Latex 300 Printer Series
Site Preparation Guide