HP Latex 820 HP Scitex LX850 & LX820 Printers: Maintenance and troubleshoo - Page 64
Carriage Rod screw., CAUTION
View all HP Latex 820 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 64 highlights
Substrate issues 4. If they are full, empty them by unclipping them and discarding the excess ink. CAUTION: If the oil reservoir is full, be careful when removing it, as oil can drip from the Carriage Rod screw. 5. Wipe the rear springs and clean with a lint-free cloth. 6. At the front of the printer, open the Officeability covers and look down into the chassis. Locate the lip designed to catch excess oil and clean the length of this with a lint free cloth. 7. Clean the front springs (there are no oil reservoirs on the front springs). You may need to repeat this treatment daily for a few days or weeks until the oil ceases to flow. TIP: Do not add extra oil to the oiling foams, which may cause the above problem. 58 Chapter 6 Troubleshoot substrate issues ENWW