HP Latex R2000 Introductory Information 2 - Page 9

Light radiation hazard, Sound pressure level, Chemical hazard, Heavy substrate hazard, Ink handling - user manual

Get HP Latex R2000 PDF manuals and user guides View all HP Latex R2000 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 9 highlights

Light radiation hazard UV radiation can be emitted from the LED array in compliance with the requirements of the exempt group of IEC 62471:2006: Photobiological safety of lamps and lamp systems. Optical barriers are used to determine the presence. However, you are recommended not to look directly for a long time at the output LEDs while they are on. Sound pressure level The sound pressure level could exceed 70 dBA in some print modes. Hearing protection may be required. Chemical hazard Safety data sheets identify ink ingredient and ventilation requirements to ensure any airborne exposure is adequately controlled. Current printer ink systems material safety data sheets are available at: http://www.hp.com/go/msds. Air conditioning and ventilation should meet local environmental and health and safety (EHS) guidelines and regulations. For more detailed information, see the "Ventilation and air conditioning" section included in the site preparation guide, available at: http://www.hp.com/go/latexR2000/manuals. Heavy substrate hazard Special care must be taken to avoid personal injury when handling heavy substrates. ● Handling heavy substrate rolls always requires two people. Care must be taken to avoid back strain and/or injury. ● Always use a forklift, pallet truck, or other handling equipment to lift substrates. The printer has been designed to be compatible with many of these devices. ● Always wear personal protective equipment including boots and gloves. Ink handling and condensates HP recommends that you wear gloves when handling ink system components and condensates. Ventilation and air conditioning As with all equipment installations, to maintain ambient comfort levels, air conditioning and ventilation in the work area should take into account that the printer produces heat. Air conditioning and ventilation should meet local environmental, health, and safety (EHS) guidelines and regulations. For a more prescriptive approach to adequate ventilation, refer to the ANSI/ASHRAE (American Society of Heating, Refrigerating, and Air-Conditioning Engineers) 62.1-2013: Ventilation for Acceptable Indoor Air Quality. An example minimum exhaust rate of 2.5 L/s.m² (0.5 cfm/ft²) of fresh air for "copy, printing rooms" is specified. NOTE: The ventilation and air conditioning units should not blow air directly onto the printer. NOTE: Maintaining positive air pressure in the print production room will help to prevent dust from entering the room. IMPORTANT: Read and follow all safety precautions before installing and/or using any HP Latex printer accessory. IMPORTANT: Check compatibility and incompatibility between different HP Latex printer accessories before any installation. This information can be found in the user guide at http://www.hp.com/go/latexR2000/manuals. ENWW 5

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
Light radiation hazard
UV radiation can be emitted from the LED array in compliance with the requirements of the exempt group of IEC
62471:2006:
Photobiological safety of lamps and lamp systems
. Optical barriers are used to determine the
presence. However, you are recommended not to look directly for a long time at the output LEDs while they are on.
Sound pressure level
The sound pressure level could exceed 70 dBA in some print modes. Hearing protection may be required.
Chemical hazard
Safety data sheets identify ink ingredient and ventilation requirements to ensure any airborne exposure is
adequately controlled.
Current printer ink systems material safety data sheets are available at:
go/msds
.
Air conditioning and ventilation should meet local environmental and health and safety (EHS) guidelines and
regulations. For more detailed information, see the “Ventilation and air conditioning” section included in the site
preparation guide, available at:
go/latexR2000/manuals
.
Heavy substrate hazard
Special care must be taken to avoid personal injury when handling heavy substrates.
●
Handling heavy substrate rolls always requires two people. Care must be taken to avoid back strain and/or
injury.
●
Always use a forklift, pallet truck, or other handling equipment to lift substrates. The printer has been
designed to be compatible with many of these devices.
●
Always wear personal protective equipment including boots and gloves.
Ink handling and condensates
HP recommends that you wear gloves when handling ink system components and condensates.
Ventilation and air conditioning
As with all equipment installations, to maintain ambient comfort levels, air conditioning and ventilation in the work
area should take into account that the printer produces heat.
Air conditioning and ventilation should meet local environmental, health, and safety (EHS) guidelines and
regulations.
For a more prescriptive approach to adequate ventilation, refer to the ANSI/ASHRAE (American Society of Heating,
Refrigerating, and Air-Conditioning Engineers) 62.1-2013:
Ventilation for Acceptable Indoor Air Quality
. An example
minimum exhaust rate of 2.5 L/s.m² (0.5 cfm/ft²) of fresh air for “copy, printing rooms” is speci
fi
ed.
NOTE:
The ventilation and air conditioning units should not blow air directly onto the printer.
NOTE:
Maintaining positive air pressure in the print production room will help to prevent dust from entering the
room.
IMPORTANT:
Read and follow all safety precautions before installing and/or using any HP Latex printer accessory.
IMPORTANT:
Check compatibility and incompatibility between di
ff
erent HP Latex printer accessories before any
installation. This information can be found in the user guide at
go/latexR2000/manuals
.
ENWW
5