HP M3035 HP LaserJet MFP and Color MFP Products - Configuring Security for Mul - Page 14

continues without issues. For instance, color settings will be ignored for a non-color MFP. For the same reason, some of the settings may not appear in HP Web Jetadmin if none of your MFPs supports them. Web Jetadmin displays only the options that apply to the MFPs you are managing. For instance, color settings will not appear if none of your MFPs has color. Ignore recommendations in this checklist if they do not appear on your Web Jetadmin screen. Before you begin, be sure to install the latest version of HP Web Jetadmin, and have it working in your network environment. You can find Web Jetadmin free for download and installation following location at hp.com: http://www.hp.com/go/webjetadmin Note: This checklist is written for HP Web Jetadmin Version 8.1; however, you should use the latest version available at hp.com. Be sure to update Web Jetadmin with the latest upgrades available from HP. See the HP Web Jetadmin Update page in the Product Update, Install menu. Setting up HP Web Jetadmin Follow these instructions to prepare Web Jetadmin for configuring the MFPs: 1. Open Web Jetadmin to view the device list (Figure 1) that appears by default. Figure 1: Web Jetadmin showing the device list on the default view. 2. Check to see that the MFPs you wish to configure appear in the Device Model List. If they are not in the list, use the Discovery options to find the MFPs on your network. Note: This checklist does not include details on MFP discovery. See Web Jetadmin user guidance for more information. In most cases, the MFPs will already appear in the default view of Web Jetadmin. Note: It is possible for Web Jetadmin to lose contact temporarily with an MFP that is configured for DHCP. Use the Discovery options to restore contact, or configure the MFPs with static IP addresses. HP LaserJet and Color LaserJet MFP Security Checklist 14