HP M8430f Upgrading and Servicing Guide - Page 11
For a Serial ATA, Gently pull back and hold the drive bay release
UPC - 883585738908
View all HP M8430f manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
4 Squeeze the tabs on the Personal Media Drive bay connector and remove the cable (A). Disconnecting the Parallel ATA hard disk drive cables 6 Remove the two screws on the front of the drive bay. 7 Gently pull back and hold the drive bay release tab while pulling out the drive bay from the front of the PC. 5 Disconnect the power cable and data cable from the back of the hard disk drive (B). For a Serial ATA drive, press the latch (1) (select models only) in the center of each plug and pull the plug (2) from the drive connector. For a Parallel ATA drive, use a gentle rocking motion to free the plug. 8 Gently lay the drive bay flat with the hard disk drive on top. Disconnecting the Serial ATA hard disk drive cables Upgrading and Servicing Guide 7