HP ML150 HP ProLiant ML150 G6 server Installation Sheet - Page 1

HP ProLiant ML150 G6 Server Installation Sheet Part number: 501527-001 March 2009 First Edition Configuring the server Refer to the HP ProLiant ML150 G6 Server Easy set-up CD contents for additional information and updates not provided in this installation sheet. 1. Connect the keyboard, mouse, and monitor 2. To determine the BIOS version: a. Power up the server. b. Press the Esc key at the HP logo screen, and then press the Pause key to halt screen movement. c. Note the server BIOS version. Verify the server BIOS version against the latest BIOS version listed for this server on the HP website: http://www.hp.com d. If necessary, update the BIOS (refer to the HP ProLiant ML150 G6 Server Maintenance and Service Guide available on the HP website: http://www.hp.com Identifying server components Figure 1 Front and rear panel components Table 1 Front and rear panel components Item Description Item Description 1 Media bays 12 System Health LED 2 USB 2.0 ports (2) 13 AC input connector 3 HDD bays 1-4 14 Expansion slots 4 HDD bays 5-8 15 Keyboard connector 5 Optical drive bay 16 Mouse connector 6 Media eject button 17 Serial port connector 7 Front key lock 18 VGA connector 8 System power button/LED 19 USB 2.0 ports (4) 9 HDD activity LED 20 NIC connector 10 NIC2 LED 21 Dedicate NIC port 11 NIC1 LED 22 UID Figure 2 System board components Table 2 System board components Item Description 1 Processor 1 Socket 2 CPU1_DIMM slot 1D 3 CPU1_DIMM slot 2A 4 CPU1_DIMM slot 3E 5 CPU1_DIMM slot 4B 6 CPU1_DIMM slot 5F 7 CPU1_DIMM slot 6C 8 Power supply connector (4-Pin) 9 Expansion Slot 5 10 Expansion Slot 4 11 Expansion Slot 3 12 Expansion Slot 2 13 Expansion Slot 1 14 CPU2_DIMM slot 6C 15 CPU2_DIMM slot 5F 16 CPU2_DIMM slot 4B 17 CPU2_DIMM slot 3E 18 CPU2_DIMM slot 2A 19 CPU2_DIMM slot 1D 20 Processor 2 socket 21 Power supply connector (8-Pin) 22 Power Supply connector (24-pin) 23 Battery Item Description 24 Internal USB connector 25 SATA 6_ODD 2 connector 26 SATA 5_ODD 1 connector 27 SATA 4 connector 28 SATA 3 connector 29 SATA 2 connector 30 SATA 1 connector 31 System fan 1 32 System fan 2 (Redundant) 33 System fan 3 34 System fan 4 35 I2C connector (2) 36 NMI button 37 SGPIO 38 Front panel USB connector 39 Internal USB port 40 Chassis/Board ID DIP switches 41 Front panel I/O connector 42 Redundant power supply connector 43 HDD LED connector 44 Thermal sensor connector 45 TPM 46 CMOS clear jumper Table 3 Expansion slot definitions Expansion Technology Bus Width Slot 1 (Standard) PCI 2.3 3.3V; 32 bits 2 (Standard) PCI-E Gen 1 x 4 3 (Standard) PCI-E Gen 2 x 4 4 (Standard) PCI-E x 16 5 (Standard) PCI-E Gen 2 x 4 Connector From factor Width Full-length, Fullheight slot x 8 Full-length, Fullheight slot x 16 Full-length, Fullheight slot x 8 Full-length, Fullheight slot x 8 Half-length, Full- height slot Opening the server CAUTION: Power down the server and remove the power cord(s) before removing or replacing non-hot-pluggable hard disk drives, DIMMs, or processors. If necessary, unlock the server with the supplied key. Figure 3 Removing the access panel Figure 4 Removing the front bezel