HP ML370 Power basics for IT professionals - Page 31

Appendix C. Plug and socket types, range. One example is the HP ProLiant DL580 G2 Server.

Page 31 highlights

Appendix C. Plug and socket types The industry uses two primary connector standards: NEMA and IEC. North America uses the NEMA standard. In the NEMA nomenclature for plugs and sockets (for example, NEMA L6-30P or NEMA L5-30P): • L means a twist-locking (as opposed to a push-in) connection • 5 means rated up to 125V, 6 means rated up to 250V • 15 means rated 15 amps, 20 means rated 20 amps, 30 means rated 30 amps • P denotes (male) plug • R denotes (female) socket A new connector for use with NA PDUs for 50A single phase has been added. It is called a CS8265c. And it is the equivalent to NEMA twist locks. The CS stands for California Standard but it is available across the country. For example, the designation NEMA L6-30P indicates a locking plug rated for up to 250 V and 30 A. And NEMA L5-30P indicates a locking plug rated for 125 V and 30 A. Each of these is shown in Figure C-1. Figure C-1. Common plugs NEMA L6-30P, 208 V, 30 A, 3 w NEMA L5-30P, 125 V, 30 A 3 ph, 4 w The other primary standard is the IEC standard. The IEC is a standards body in Geneva, Switzerland, that defines the most common connectors: the IEC 320 general-purpose household connectors and the IEC 309 industrial-grade connectors. The C13/C14 connectors are the 10-A power supply connectors used on 90 percent of HP equipment. With all IEC 320 connectors, females (receptacles) have odd numbers; males (plugs) have even numbers. The C19/C20 connectors are rated for 16 A. Larger or higher power devices may require C19/C20 connectors if the input can exceed the 10-A range. One example is the HP ProLiant DL580 G2 Server. In the IEC nomenclature for plugs and sockets (for example, IEC-320 C19/20): • C13/14 means 10-amp connectors (odd for female, even for male) 31

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44

Appendix C. Plug and socket types
The industry uses two primary connector standards: NEMA and IEC.
North America uses the NEMA standard. In the NEMA nomenclature for plugs and sockets (for
example, NEMA L6-30P or NEMA L5-30P):
L means a twist-locking (as opposed to a push-in) connection
5 means rated up to 125V, 6 means rated up to 250V
15 means rated 15 amps, 20 means rated 20 amps, 30 means rated 30 amps
P denotes (male) plug
R denotes (female) socket
A new connector for use with NA PDUs for 50A single phase has been added. It is called a
CS8265c. And it is the equivalent to NEMA twist locks. The CS stands for California Standard but it
is available across the country.
For example, the designation NEMA L6-30P indicates a locking plug rated for up to 250 V and 30 A.
And NEMA L5-30P indicates a locking plug rated for 125 V and 30 A. Each of these is shown in
Figure C-1.
Figure C-1.
Common plugs
NEMA L6-30P,
208 V, 30 A, 3 w
NEMA L5-30P,
125 V, 30 A 3 ph, 4 w
The other primary standard is the IEC standard. The IEC is a standards body in Geneva, Switzerland,
that defines the most common connectors: the IEC 320 general-purpose household connectors and the
IEC 309 industrial-grade connectors. The C13/C14 connectors are the 10-A power supply
connectors used on 90 percent of HP equipment. With all IEC 320 connectors, females (receptacles)
have odd numbers; males (plugs) have even numbers. The C19/C20 connectors are rated for 16 A.
Larger or higher power devices may require C19/C20 connectors if the input can exceed the 10-A
range. One example is the HP ProLiant DL580 G2 Server.
In the IEC nomenclature for plugs and sockets (for example, IEC-320 C19/20):
C13/14 means 10-amp connectors (odd for female, even for male)
31