HP MP1200 Compaq IPAQ Microportable Projector MP1200 - Users Manual - Page 14
Connecting the Projector to a Desktop Computer
UPC - 808736438728
View all HP MP1200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
Using the Projector Connecting the Projector to a Desktop Computer 1. Connect one end of the projector signal cable into the VGA-in connector on the side of the projector and the other end to the DVI connector 1A or the VGA connector 1B on the desktop computer and tighten the screws. ✎ Be sure the signal cable aligns with the connector. Do not force the cable onto the connector or you may damage the signal cable or the projector. 2. Connect one end of the power cord 2 into the side of the projector, and the other end to an electrical outlet that is easily accessible and close to the projector. Compaq iPAQ Microportable Projector MP1200 User's Guide 2-3
Using the Projector
Compaq iPAQ Microportable Projector MP1200 User’s Guide
2–3
Connecting the Projector to a Desktop Computer
1. Connect one end of the projector signal cable into the
VGA-in connector on the side of the projector and the other
end to the DVI connector
1
A
or the VGA connector
1
B
on
the desktop computer and tighten the screws.
✎
Be sure the signal cable aligns with the connector. Do not force
the cable onto the connector or you may damage the signal cable
or the projector.
2. Connect one end of the power cord
2
into the side of the
projector, and the other end to an electrical outlet that is
easily accessible and close to the projector.