HP MSA70 HP StorageWorks 6X/7X Series Modular Storage Array Enclosure I/O Modu - Page 2
Installing the I/O module, Verifying component replacement
![]() |
View all HP MSA70 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 2 highlights
Installing the I/O module To install the I/O module: 1. Squeeze the lever and pull it down. 2. Slide the I/O module into the chassis until it clicks into place. 3. Connect SAS cables to the module. 4. Power up the enclosure. Verifying component replacement After replacing the I/O module, check the I/O module status LED.
![](/manual_guide/products/hewlettpackard-60-hp-storageworks-6x7x-series-modular-storage-array-enclosure-io-module-replacement-instructions-436502001-2006-8013346/2.png)
Installing the I/O module
To install the I/O module:
1.
Squeeze the lever and pull it down.
2.
Slide the I/O module into the chassis until it clicks into
place.
3.
Connect SAS cables to the module.
4.
Power up the enclosure.
Verifying component replacement
After replacing the I/O module, check the I/O module status
LED.