HP MSL4048 HP StorageWorks 1/8 G2 Tape Autoloader firmware release notes (AK37 - Page 3

Version: 2.70 Description This release includes updated firmware for the HP StorageWorks 1/8 G2 Tape Autoloader . The Autoloader firmware can be updated through any of the following methods: • Remote management interface (RMI). • Operator control panel (OCP) using a USB flash drive. • HP Library and Tape Tools (L&TT). Autoloader firmware version 2.70 Compatible robotics firmware version 2.0n0 Update recommendation Recommended Supersedes All previous versions of Autoloader firmware. Product models All HP StorageWorks 1/8 G2 Tape Autoloaders Languages • English (American) • English (International) Enhancements • MSL encryption tokens (AN4095A), which were incorrectly manufactured with non-released firmware, are now detected. When a token that was manufactured incorrectly is inserted into the USB port and the configuration of the status page is accessed by the RMI, a warning message is displayed on the RMI and OCP, and a warning condition is logged as 0xE7 - "Incorrect Key Server Token type". This release will protect customers currently using the incorrectly manufactured tokens from damaging the device. A Customer Bulletin is available instructing the customer on how to obtain replacement tokens and properly transfer their keys to the new token. Fixes • SNMP Version 2 traps now work correctly for all community names. • SNMP Version 3 was offered in the configuration pull down menu, but SNMPv3 is not supported. The SNMP Version 3 option has been removed from the menu. • Fixed a case where the Autoloader could not detect the magazine. The following error were possible with this issue: • 9B - Sled position sensor (prism sensor) not found • C4 - Sled movement to sensor during check on magazine type failed HP StorageWorks 1/8 G2 Tape Autoloader firmware release notes 3