HP Media Center m428cn HP Media Center Desktop PC - (English) m428cn Technical - Page 1

Technical Specifications Model m428cn Processor & Speed Chipset Motherboard RAM Maximum Sockets Size Free DIMM Sockets Pairs Required Type Supported Cache Hard Drive Optical Drive Average Random Access Transfer Rate Diskette Drive 7 in 1 Card Reader Fax/Data Modem Fax Speed Data Compression Error Correction EIA Fax Commands Video Graphics Controller Video Memory Video Connectors TV-Tuner Network Card 1394 Card Sound Controller Chassis USB Interface Specification External Ports Front I/O Connector Expansion Slots (Total) Expansion Slots (FREE) Drive Bays (Total) Drive Bays (FREE) Keyboard/Mouse DT136A 2.5 GHz/400 Intel® Pentium® 4 Processor - PGA478 Intel® 848P Oxford-UL6E (4PSD-LA) 256/3200 MB 400 DDR SDRAM (runs@266MHz) 2 GB (2x1024MB DDR SDRAM) Two 184-pin DDR DIMMs 128, 256, 512 AND 1024 MB DDR DIMMs One No JEDEC unbuffered DDR SDRAM DIMM specification 8KB Data Cache + Trace Cache L1, 512 KB L2 Integrated on Processor module 80 GB (7200 RPM) CD-RW/DVD-ROM Drive 48x24x16x48 48X- Write /24X - Re-write /16x- DVD Read 48X - CD-ROM Read DVD =115ms / CD-ROM =95ms DVD = 21.6/sec. / CD-ROM = 7.2MB/sec. 3.5" (1.44MB) Compact Flash I/II; Memory Stick/Pro; MMC/SD; Smart Media V.92 56Kbps Up to 14.4Kbps V.42 bis V .42 Class 1 AGP 8X Graphics Card nVidia GeForce4™ MX-440 64 MB DDR, not upgradeable Composite & S-Video - PAL TV-Tuner w/FM Capture Card 10/100 BaseT, Integrated IEEE-1394, Integrated AC'97, 6 Channel, Integrated on MB Realtek ALC650 Everest3, 230HV + PFC PSU USB 2.0 6= USB, 1= serial, 1= parallel, 2=1394 2= USB, 1= 1394; 7 in 1 Card Reader; 1= Microphone; 1=Line In; 1=Headphone; Video/S- Video In 3= PCI, 1= AGP 2= PCI Two 5.25" external, One 3.5" external, Two 3.5" internal One 5.25" external, One 3.5" internal One-touch Enhanced Keyboard, PS/2 Optical scrolling mouse Copyright Hewlett-Packard Co. 1994-2003 This information is subject to change without notice and is provided "as is" with no warranty. Hewlett-Packard shall not be liable for any direct, indirect, special, incidental or consequential damages in connection with the use of this material.