HP Mellanox SX1018 Mellanox MLNX-OS® Release Notesfor SX1018HP Ethern
HP Mellanox SX1018 Manual
View all HP Mellanox SX1018 manuals
Add to My Manuals
Save this manual to your list of manuals |
HP Mellanox SX1018 manual content summary:
- HP Mellanox SX1018 | Mellanox MLNX-OS® Release Notesfor SX1018HP Ethern - Page 1
Mellanox MLNX-OS® Release Notes for SX1018HP Ethernet Managed Blade Switch Software Ver. 3.3.4100 www.mellanox.com Mellanox® Technologies Confidential - HP Mellanox SX1018 | Mellanox MLNX-OS® Release Notesfor SX1018HP Ethern - Page 2
2 Mellanox Technologies Mellanox® Technologies Confidential - HP Mellanox SX1018 | Mellanox MLNX-OS® Release Notesfor SX1018HP Ethern - Page 3
Supported Firmware 4 2.4 Supported Software Licenses 4 2.5 Supported Cables 5 Chapter 3 Changes and New Features 6 Chapter 4 Known Issues 7 4.1 General Known Issues 7 4.2 Ethernet Known Issues 9 Chapter 5 Bug Fixes 12 Chapter 6 Submitting a Service Request 12 Mellanox Techologies 3 Mellanox - HP Mellanox SX1018 | Mellanox MLNX-OS® Release Notesfor SX1018HP Ethern - Page 4
firmware version 2.11.1250 and higher 2.4 Supported Software Licenses For the software licenses supported with MLNX-OS® software please refer to the "Licenses" section of the "Getting Started" chapter of the Mellanox MLNX-OS User Manual. Mellanox Technologies 4 Mellanox® Technologies Confidential - HP Mellanox SX1018 | Mellanox MLNX-OS® Release Notesfor SX1018HP Ethern - Page 5
2.5 Supported Cables The following are the qualified cables for SX1018HP: Table 2 - Qualified Cables for SX1018HP Mellanox P/N HP P/N Description N/A MC2207130-00A MC2207130-001 MC2207130-0A1 MC2207130-002 MC2207128-003 MFS4R12CB-003 MFS4R12CB-005/ MC2207310-005 MFS4R12CB-010 MFS4R12CB-010/ - HP Mellanox SX1018 | Mellanox MLNX-OS® Release Notesfor SX1018HP Ethern - Page 6
SX1018HP guide. Added support for displaying system hardware revision. Refer to "show inventory" command in the CLI reference guide. Added support for event notification to monitor. Refer to Event Notification chapter in the User Manual CLI reference guide for additional details - HP Mellanox SX1018 | Mellanox MLNX-OS® Release Notesfor SX1018HP Ethern - Page 7
using the no ip default-gateway command. In-Band Management In-band management mode does not support IPv6. In-Band Management NTP In-band management ARPs are not taken into account in with a sequence number larger than 495 are deleted. Mellanox Technologies 7 Mellanox® Technologies Confidential - HP Mellanox SX1018 | Mellanox MLNX-OS® Release Notesfor SX1018HP Ethern - Page 8
(MELLANOXMIB)" can appear in the log when performing rollback to a MLNX-OS version older than 3.3.3000. This error can be safely ignored. 19. Chassis Management Supported USB flash drives are USBv2 protocol and above. 20. IP Routing The current release does not - HP Mellanox SX1018 | Mellanox MLNX-OS® Release Notesfor SX1018HP Ethern - Page 9
correlated to the number of the trunk/hybrid ports in the system. Restrict the range of VLANs deleted to groups of up to a 100 VLANs. Mellanox Technologies 9 Mellanox® Technologies Confidential - HP Mellanox SX1018 | Mellanox MLNX-OS® Release Notesfor SX1018HP Ethern - Page 10
allowed-vlan 100-3000. To fix the problem, run the commands interface ethernet 1/x switchport multicast option to forward-to-mrouterports option reduces the amount of supported VLANs to 250. There is no possibility to have more than Mellanox Technologies 10 Mellanox® Technologies Confidential - HP Mellanox SX1018 | Mellanox MLNX-OS® Release Notesfor SX1018HP Ethern - Page 11
Description 25. SNMP 26. Port Mirroring 27. sFlow LLDP MIB OID lldpRemPortDesc is not supported. When port mirroring congestion is configured to "drop-excessive-frames" (best effort), while a skew of one second. Possible Workaround Mellanox Technologies 11 Mellanox® Technologies Confidential - HP Mellanox SX1018 | Mellanox MLNX-OS® Release Notesfor SX1018HP Ethern - Page 12
is disabled on that VLAN (or globally). If more are added, they overwrite their predecessors. 6 Submitting a Service Request The Mellanox® Support Center is at your service for any issues. You may access the Warranty Service through the Web Request Form by using the following link: http://www
www.mellanox.com
Mellanox MLNX-OS® Release Notes
for
SX1018HP Ethernet
Managed Blade Switch
Software Ver. 3.3.4100
Mellanox® Technologies Confidential