HP Mini 1003TU HP Mini 1000 and Compaq Mini 700 - Maintenance and Service Guid - Page 76
Compaq Mini 700 only., that secure the brackets to the display panel.
View all HP Mini 1003TU manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 76 highlights
c. Remove the display panel (3) from the display enclosure. An 8.9-inch display panel for the HP Mini 1000 and the Compaq Mini 700 is available as spare part number 509698-001. A 10.1-inch display panel for the Compaq Mini 700 only is available as spare part number 509703-001. 8. If it is necessary to replace the display panel brackets, perform the following steps: a. Remove the four Phillips PM2.0×3.0 screws (1) that secure the brackets to the display panel. b. Remove the brackets (2). The brackets are available in the Display Hinge Kit, spare part number 504596-001 for all 8.9-inch panels or 515207-001 for 10.1-inch panels (Compaq Mini 700 only). 68 Chapter 4 Removal and replacement procedures
c.
Remove the display panel
(3)
from the display enclosure. An 8.9-inch display panel for the
HP Mini 1000 and the Compaq Mini 700 is available as spare part number 509698-001. A
10.1-inch display panel for the Compaq Mini 700 only is available as spare part number
509703-001.
8.
If it is necessary to replace the display panel brackets, perform the following steps:
a.
Remove the four Phillips PM2.0×3.0 screws
(1)
that secure the brackets to the display panel.
b.
Remove the brackets
(2)
. The brackets are available in the Display Hinge Kit, spare part
number 504596-001 for all 8.9-inch panels or 515207-001 for 10.1-inch panels
(Compaq Mini 700 only).
68
Chapter 4
Removal and replacement procedures