HP Mini 1033CL HP Mini 1000 and Compaq Mini 700 - Maintenance and Service Guid - Page 75
Remove the nine Phillips PM2.0×3.0 screws that secure the display panel to the display
View all HP Mini 1033CL manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 75 highlights
d. Remove the two Phillips PM2.0×3.0 screws (1) that secure the webcam module to the display enclosure. e. Remove the webcam module (2). The webcam module is available as spare part number 504594-001 for all 8.9-inch panels or 515213-001 for 10.1-inch panels (Compaq Mini 700 only). 7. If it is necessary to replace the display panel, perform the following steps: a. Remove the nine Phillips PM2.0×3.0 screws that secure the display panel to the display enclosure. b. Remove the wireless antenna cables (1) from the clips and routing channels built into the display and brackets (2). Component replacement procedures 67
d.
Remove the two Phillips PM2.0×3.0 screws
(1)
that secure the webcam module to the display
enclosure.
e.
Remove the webcam module
(2)
. The webcam module is available as spare part number
504594-001 for all 8.9-inch panels or 515213-001 for 10.1-inch panels (Compaq Mini 700
only).
7.
If it is necessary to replace the display panel, perform the following steps:
a.
Remove the nine Phillips PM2.0×3.0 screws that secure the display panel to the display
enclosure.
b.
Remove the wireless antenna cables
(1)
from the clips and routing channels built into the
display and brackets
(2)
.
Component replacement procedures
67