HP Mini 110-1047TU Service Guide - Page 56
Memory module, cover to the computer.
View all HP Mini 110-1047TU manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 56 highlights
Memory module Description Memory module (PC2-5300, 533-MHz, DDR2) 512-MB (for use in HP Mini 110 and Compaq Mini 110 only) 1024-MB 2048-MB Spare part number 537663-001 537664-001 537665-001 Before removing the memory module, follow these steps: 1. Shut down the device. If you are unsure whether the device is off or in Hibernation, turn the device on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the device. 3. Disconnect the power from the device by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the device. 4. Remove the battery (see Battery on page 44). 5. If your device has WWAN capability, remove the SIM (see SIM on page 45). Remove the memory module: 1. Loosen the 2 Phillips 2.0×3.0 captive screws (1) that secure the memory module compartment cover to the computer. 2. Swing the cover up and away from the inside of the computer (2), and then remove the cover (3). 3. Spread the retaining tabs (1) on each side of the memory module slot to release the memory module. (The edge of the module opposite the slot rises away from the device.) 46 Chapter 4 Removal and replacement procedures