HP Mini 110-1120TU Service Guide - Page 87
Remove the 4 Phillips PM2.5×5.0 screws
View all HP Mini 110-1120TU manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 87 highlights
5. If your device has WWAN capability, remove the SIM (see SIM on page 45). 6. Remove the following components: a. Keyboard (see Keyboard on page 48) b. Hard drive or solid-state drive (see Mass storage devices on page 54) c. Top cover (see Top cover on page 57) Remove the display assembly: 1. Release the tape securing the WWAN antennas (1). 2. Disconnect the following cables from the system board: (2) Display panel cable (3) Microphone cable (4) Speaker cable (5) WLAN cables (6) WWAN cables (select models only) CAUTION: Support the display assembly when removing the following screws. Failure to support the display assembly can result in damage to the display assembly and other device components. 3. Remove the 4 Phillips PM2.5×5.0 screws (1) that secure the display assembly to the device. NOTE: One screw on the left hinge (2) also secures the display panel cable ground strap. Component replacement procedures 77