HP Mini 110-1191EO Service Guide - Page 84
Remove the system board., Reverse the procedure to install the system board.
View all HP Mini 110-1191EO manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 84 highlights
5. Remove the 3 Phillips PM2.5×5.0 screws that secure the system board to the base enclosure. 6. Grasp the system board at the midpoint of the left side (1), and lift it up. 7. Pull the system board (2) out to the left at an angle to remove it. 8. Remove the system board. Reverse the procedure to install the system board. 74 Chapter 4 Removal and replacement procedures
5.
Remove the 3 Phillips PM2.5×5.0 screws that secure the system board to the base enclosure.
6.
Grasp the system board at the midpoint of the left side
(1)
, and lift it up.
7.
Pull the system board
(2)
out to the left at an angle to remove it.
8.
Remove the system board.
Reverse the procedure to install the system board.
74
Chapter 4
Removal and replacement procedures