HP Mini 1100 HP Mini 1000 and Compaq Mini 700 - Maintenance and Service Guide - Page 72
that secure the speaker assembly to the, Screw Kit
View all HP Mini 1100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 72 highlights
2. Remove the display assembly (2). 3. If it is necessary to replace the speaker assembly, perform the following steps: a. Squeeze the sides of the speaker grill together to release the pressure clips, and then remove the speaker grill. The speaker grill is available as spare part number 506338-001. b. Remove the two Phillips PM2.0×4.5 screws (1) that secure the speaker assembly to the display enclosure. All display assembly subcomponent screws are available in the Display Screw Kit, spare part number 509700-001 for all 8.9-inch panels or 515211-001 for 10.1-inch panels (Compaq Mini 700 only). 64 Chapter 4 Removal and replacement procedures
2.
Remove the display assembly
(2)
.
3.
If it is necessary to replace the speaker assembly, perform the following steps:
a.
Squeeze the sides of the speaker grill together to release the pressure clips, and then remove
the speaker grill. The speaker grill is available as spare part number 506338-001.
b.
Remove the two Phillips PM2.0×4.5 screws
(1)
that secure the speaker assembly to the
display enclosure. All display assembly subcomponent screws are available in the Display
Screw Kit, spare part number 509700-001 for all 8.9-inch panels or 515211-001 for 10.1-inch
panels (Compaq Mini 700 only).
64
Chapter 4
Removal and replacement procedures