HP Mini 1101 HP Mini 1101 Notebook PC, HP Mini 110, and Compaq Mini 110 - Main - Page 60
Remove the 2 Phillips PM2.0×4.0 screws, Remove the WLAN module
View all HP Mini 1101 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 60 highlights
Remove the WLAN module: 1. Remove the 2 Phillips PM2.0×4.0 screws (1) that secure the WLAN module to the system board. (The edge of the module opposite the slot rises away from the device.) 2. Disconnect the wireless antenna cables (2) from the terminals on the WLAN module. 3. Remove the WLAN module (3) by pulling the module away from the slot at an angle. Reverse this procedure to install the WLAN module. 52 Chapter 4 Removal and replacement procedures
Remove the WLAN module:
1.
Remove the 2 Phillips PM2.0×4.0 screws
(1)
that secure the WLAN module to the system board.
(The edge of the module opposite the slot rises away from the device.)
2.
Disconnect the wireless antenna cables
(2)
from the terminals on the WLAN module.
3.
Remove the WLAN module
(3)
by pulling the module away from the slot at an angle.
Reverse this procedure to install the WLAN module.
52
Chapter 4
Removal and replacement procedures