HP Mini 210-1003SA HP Mini 2102, HP Mini 210, and Compaq Mini 210 - Maintenanc - Page 55
Memory module, Grasp the edge of the memory module
View all HP Mini 210-1003SA manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 55 highlights
Memory module Description 2048-MB memory module (667-MHz, DDR2) 1024-MB memory module (667-MHz, DDR2) Spare part number 589666-001 589665-001 Before removing the memory module, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 4. Remove the battery (see Battery on page 38). 5. Remove the service cover (see Service cover on page 40). Remove the memory module: 1. Pull away the retention clips (1) on each side of the memory module to release the memory module. (The memory module tilts up.) CAUTION: To prevent damage to the memory module, hold it by the edges only. Do not touch the components on the memory module. 2. Grasp the edge of the memory module (2), and then pull it out of the memory module slot. NOTE: Memory modules are designed with a notch (3) to prevent incorrect insertion into the memory module slot. Reverse this procedure to install the memory module. Component replacement procedures 47