HP Mini 210-1022SS HP Mini 2102, HP Mini 210, and Compaq Mini 210 - Maintenanc - Page 52
Remove the hard drive bracket, that secure the hard drive bracket to
View all HP Mini 210-1022SS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 52 highlights
3. Remove the hard drive (4) by sliding it up and to the right at an angle. 4. If it is necessary to replace the hard drive bracket, follow these steps: a. Disconnect the cable adapter (1) from the hard drive. b. Remove the four Phillips PM3.0×3.0 screws (2) that secure the hard drive bracket to the drive. c. Remove the hard drive bracket (3). d. Remove the four rubber isolators (4) from the bracket. Reverse this procedure to reassemble and install the hard drive. 44 Chapter 4 Removal and replacement procedures
3.
Remove the hard drive
(4)
by sliding it up and to the right at an angle.
4.
If it is necessary to replace the hard drive bracket, follow these steps:
a.
Disconnect the cable adapter
(1)
from the hard drive.
b.
Remove the four Phillips PM3.0×3.0 screws
(2)
that secure the hard drive bracket to the
drive.
c.
Remove the hard drive bracket
(3)
.
d.
Remove the four rubber isolators
(4)
from the bracket.
Reverse this procedure to reassemble and install the hard drive.
44
Chapter 4
Removal and replacement procedures