HP Mini 210-1100 Mini User Guide - Windows 7 - Page 78
Memory modules, Remove the battery from the computer - memory upgrade
View all HP Mini 210-1100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 78 highlights
11 Memory modules The computer has one memory module compartment, which is located on the bottom of the computer, beneath the removable bottom panel. The memory capacity of the computer can be upgraded by replacing the existing memory module in the memory module slot. WARNING! To reduce the risk of electric shock and damage to the equipment, unplug the power cord and remove all batteries before installing a memory module. CAUTION: Electrostatic discharge (ESD) can damage electronic components. Before beginning any procedure, ensure that you are discharged of static electricity by touching a grounded metal object. To add or replace a memory module: 1. Save your work. 2. Shut down the computer and close the display. If you are not sure whether the computer is off or in Hibernation, turn the computer on by sliding the power switch. Then shut down the computer through the operating system. 3. Disconnect all external devices connected to the computer. 4. Unplug the power cord from the AC outlet. 5. Turn the computer upside down on a flat surface. 6. Remove the battery from the computer (1). NOTE: For more information, refer to the section "Inserting or removing the battery," earlier in this guide. 7. Remove the bottom panel: a. Press the inner release latches (2) on the left and right sides to loosen the bottom panel. b. Pull away the bottom panel (3). 68 Chapter 11 Memory modules