HP Mini CQ10-110SB Compaq Mini CQ10 Notebook PC and Compaq Mini 102 Notebook P - Page 63
DC connector/power board, Disconnect the power cable
View all HP Mini CQ10-110SB manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 63 highlights
DC connector/power board Description DC connector/power board Spare part number 581326-001 Before removing the power/battery pass-through board, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 4. Remove the battery (see Battery on page 36). 5. If your computer has WWAN capability, remove the SIM (see SIM on page 37). 6. Remove the following components: a. Keyboard (see Keyboard on page 40) b. Hard drive (see Mass storage devices on page 44) c. Top cover (see Top cover on page 46) Remove the power/battery pass-through board: 1. Disconnect the power cable (1). 2. Remove the 2 Phillips PM2.5×4.0 screws (2) that secure the power/battery pass-through board to the base enclosure. 3. Remove the power/battery pass-through board (3). Reverse this procedure to install the power/battery pass-through board. Component replacement procedures 55