HP Mini CQ10-610CA HP Mini 110 and Compaq Mini CQ10 - Maintenance and Service - Page 67
from the system board., Disconnect the speaker cable
View all HP Mini CQ10-610CA manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 67 highlights
3. Remove the interior hinge covers (2). 4. Turn the computer upside down, with the front toward you. 5. Remove the rear rubber feet, and then remove the 2 Phillips 2.5×5.0 screws (1) under the feet. 6. Remove the 4 Phillips 2.0×5.0 screws (2) that secure the top cover to the base enclosure. 7. Turn the computer right-side up, with the front toward you. 8. Open the computer as far as possible. 9. Disconnect the speaker cable (1) from the system board. 10. Release the ZIF connector (2) to which the TouchPad cable is connected, and then disconnect the TouchPad cable (3) from the system board. Component replacement procedures 59
3.
Remove the interior hinge covers
(2)
.
4.
Turn the computer upside down, with the front toward you.
5.
Remove the rear rubber feet, and then remove the 2 Phillips 2.5×5.0 screws
(1)
under the feet.
6.
Remove the 4 Phillips 2.0×5.0 screws
(2)
that secure the top cover to the base enclosure.
7.
Turn the computer right-side up, with the front toward you.
8.
Open the computer as far as possible.
9.
Disconnect the speaker cable
(1)
from the system board.
10.
Release the ZIF connector
(2)
to which the TouchPad cable is connected, and then disconnect the
TouchPad cable
(3)
from the system board.
Component replacement procedures
59