HP Model 715/100 single-ended 2GB disk drive user notes (a1658-90698) - Page 1
HP Model 715/100 - Workstation Manual
View all HP Model 715/100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 1 highlights
The software patches may be obtained from HP Customer Service. INSTRUCTIONS FOR HP-UX 9.03 and 9.05 You will not be able to load HP-UX 9.03 on a standalone, newly installed 2-GB drive. To install HP-UX 9.03 on 2-GB drives, you must use a netdist install server. You must install patch PHSS_5776 on the netdist install server to recognize 2-GB drives for both HP-UX 9.03 and 9.05. After you have loaded HP-UX onto the drive, you must load patch PHCO_7461 for disktab and sam functionality. Install the patches using /etc/update. To load HP-UX 9.05 onto a newly installed standalone 2-GB drive, prior to loading the patches, perform the following steps: 1. Begin the HP-UX software installation process. The following message appears: "Note: the destination disk type "disk-drive-model-number" was not found in the disk table /etc/disktab. (Press any key to continue.)" 2. Press any key. The screen displays the following message: "If model number: "disk-drive-model-number", is incorrect, and a correct one (one that has an entry in the /etc/disktab) is known, please enter it now otherwise press return." 3. Press: (or ) The screen displays a message about using default parameters. 4. Press any key. 5. Let the software installation process complete. INSTRUCTIONS FOR HP-UX 10.X After you have loaded HP-UX onto the new drive, install the appropriate patches using swinstall and reboot the system. 2-GB (Single-ended) Disk Drive User Notes Refer to your workstation owner's guide or your disk drive installation guide for detailed information about installing your disk drive. During the installation procedure, you may have to change the SCSI ID of your disk drive. Refer to the appropriate illustration to set the SCSI ID jumpers to the desired SCSI ID. NOTICE: We recommend that you use SCSI ID 6 for your workstation's first hard disk drive, and SCSI ID 5 for the second hard disk drive. Minimum Software Requirements The 2-GB disk drive is fully operational with HP-UX Release 9.03 and later on Series 700 systems, although software patches may be necessary. Please see the following table and the instructions on the last page of this document. HP-UX Version Patches - OS 9.03 PHCO_7461, PHSS_5776 9.05 PHCO_7461, PHSS_5776 9.07 N/A 10.01 PHKL_8361 10.10 PHKL_8359 10.20 PHKL_8187 Patches - Diags PHSS_7587 PHSS_7587 PHSS_7587 PHSS_7583 PHSS_7585 PHSS_7759 Part Number A1658-90698 Edition E1096 Printed in U.S.A. *A1658-90698*