HP Model 715/80 hp 4x speed CD-ROM disk drive user's guide (a1658-90688) - Page 20
Preparing the System
View all HP Model 715/80 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 20 highlights
Introduction Preparing the System Perform the following steps to prepare the system for the CD-ROM drive installation: 1. Determine the existing SCSI-2 address settings currently in use on your system. Before installing the drive, determine which SCSI-2 ID address settings are already being used on your system by completing the following steps: 2. If you are using HP-UX 9.05, enter the following at the prompt: /etc/ioscan -d scsi RETURN After a few moments the ioscan utility lists all of the SCSI I/O devices it could find. If there is a SCSI CD-ROM drive in the list, that listing appears similar to the following: H/W Path Description Status 2.0.1.2.0 scsi ok(nnnnnnnn) If you are using HP-UX 10.0, enter the following at the prompt: /usr/sbin/ioscan -d sdisk RETURN 1-10