HP Model 730 hp DDS-2 tape drive user's guide (a1658-90689) - Page 43
To exit the Support T
View all HP Model 730 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 43 highlights
Troubleshooting and Removal/Replacement Procedures NOTE: If a VUE login screen is currently displayed on the monitor, the test will wait until someone logs in the HP VUE on the graphics monitor to release the lock. The test stops if the Screen Saver times out, it runs again once the Screen is activated. WARNING: Do not run this exerciser with any other operation. (Type 'R' for Ready, Type 'S' for Skip) [R] >> 3. When you see the >> prompt shown above, type the following: R RETURN 4. The following appears from 2/0/1.3.0: Load blank medium on drive 2/0/1.3.0 (Type 'R' for Ready, Type 'S' for Skip) [R] >> The following messages and a graphics test window appear: Verification of (2/0/1.6.0) has completed. Result status - (Success). Verification of (CPU) has completed. Result status - (Success). Verification of (FPU) has completed. Result status - (Success). Verification of (2/0/2) has completed. Result status - (Success). Verification of (0/0/0) has completed. Result status - (Success). 5. To return the CSTM> prompt, press . RETURN 6. To exit the Support Tools Manager, enter the following: CSTM> exit RETURN If any tests failed, further diagnosis is necessary by qualified service personnel. 3-8