HP Model 755/125cL hp DDS-2 tape drive user's guide (a1658-90701) - Page 25
Adding or Removing the DDS-2 Drive Bezels or Expansion Brackets
View all HP Model 755/125cL manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 25 highlights
Introduction Adding or Removing the DDS-2 Drive Bezels or Expansion Brackets Depending on the size of the drive opening in your system, you may need to add or remove a bezel or expansion brackets to ensure that your DDS-2 drive fits in your system. Part numbers for the HP bezels are as follows: • C1534-60117 - 3 1/2 inch Dove Grey • C1534-60226 - 5 1/4 inch Dove Grey • C1534-60116 - 3 1/2 inch Flint Grey • C1534-60225 - 5 1/4 inch Flint Grey NOTICE: Before performing any of these changes, make sure there is not a cassette in the drive. To add a bezel (it can be a 3.5-inch bezel, or a 5.25-inch bezel) to your drive, push the bezel onto the drive, making sure the tabs click into place. Refer to Figure 1-5. Figure 1-5. Adding a Bezel to the DDS-2 Drive 1-15