HP MultiSeat ms6000 Hardware Reference Guide HP Compaq MultiSeat ms6000 Deskto - Page 26

Removing an Expansion Slot Cover, Opening the Expansion Slot Retainer

Get HP MultiSeat ms6000 PDF manuals and user guides View all HP MultiSeat ms6000 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 26 highlights

7. Locate the correct vacant expansion socket on the system board and the corresponding expansion slot on the back of the computer chassis. 8. Release the slot cover retention latch that secures the PCI slot covers by lifting the green tab on the latch and rotating the latch to the open position. Figure 2-11 Opening the Expansion Slot Retainer 9. Before installing an expansion card, remove the expansion slot cover or the existing expansion card. a. If you are installing an expansion card in a vacant socket, remove the appropriate expansion slot cover on the back of the chassis. Pull the slot cover straight up then away from the inside of the chassis. Figure 2-12 Removing an Expansion Slot Cover 20 Chapter 2 Hardware Upgrades ENWW

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
7.
Locate the correct vacant expansion socket on the system board and the corresponding expansion
slot on the back of the computer chassis.
8.
Release the slot cover retention latch that secures the PCI slot covers by lifting the green tab on
the latch and rotating the latch to the open position.
Figure 2-11
Opening the Expansion Slot Retainer
9.
Before installing an expansion card, remove the expansion slot cover or the existing expansion
card.
a.
If you are installing an expansion card in a vacant socket, remove the appropriate expansion
slot cover on the back of the chassis. Pull the slot cover straight up then away from the inside
of the chassis.
Figure 2-12
Removing an Expansion Slot Cover
20
Chapter 2
Hardware Upgrades
ENWW