HP Mv2120 HP Media Vault - Quick Start Guide - Page 8
Troubleshooting - media vault how to
UPC - 883585549856
View all HP Mv2120 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
HP Media Vault English Troubleshooting You don't have an available port on your network's router Step 1. To add additional Ethernet ports, connect an Ethernet switch to your router. Refer to the switch documentation for instructions on how it connects to your router. Step 2. Connect one end of the Ethernet cable that came with the HP Media Vault to the switch and the other end to your HP Media Vault. Step 3. Restart your router (or unplug and plug it back in). Step 4. If you are using your own Ethernet cable, try using the Ethernet cable that came with the HP Media Vault. Your HP Media Vault's is yellow or red Check the troubleshooting section of the User's Guide that came on the HP Media Vault's Software Installation Disc. Your HP Media Vault turns itself off after a few minutes Make sure you press in the power button until you feel the button "click." Failure to press in the button far enough can cause the HP Media Vault to automatically power itself off after starting. Your HP Media Vault's is not green Step 1. Make sure that you press in the power button until you feel the button "click." Failure to press in the button far enough can cause the HP Media Vault to automatically power itself off after starting. Step 2. Make sure you have correctly plugged in all the cable connections and the power cord. Step 3. Restart all the devices on your network, including your computers and the HP Media Vault. Your HP Media Vault's is not green Step 1. Make sure all devices on your network are correctly installed and that the cables are connected to the proper ports. Step 2. Make sure your router has power. 5