HP Nc6400 HP Compaq nc6400 Notebook PC Maintenance and Service Guide - Page 122
Slide the MultiBay II device, Remove the Phillips PM2.5×5.0 screw
View all HP Nc6400 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 122 highlights
Removal and Replacement Procedures 3. Remove the Phillips PM2.5×5.0 screw 1 that secures the MultiBay II device to the computer. 4. Push in on the right side of the MultiBay II device 2. (The MultiBay II device partially protrudes from the MultiBay II.) 5. Slide the MultiBay II device 3 out of the computer. Removing the MultiBay II Device Reverse the above procedure to install an MultiBay II device. 5-22 Maintenance and Service Guide
5°22
Maintenance and Service Guide
Removal and Replacement Procedures
3. Remove the Phillips PM2.5×5.0 screw
1
that secures the
MultiBay II device to the computer.
4. Push in on the right side of the MultiBay II device
2
.
(The MultiBay II device partially protrudes from the
MultiBay II.)
5. Slide the MultiBay II device
3
out of the computer.
Removing the MultiBay II Device
Reverse the above procedure to install an MultiBay II device.