HP NetServer LH 3000 Installation Guide for Compaq 4000/7000 Racks - Page 5
Introduction
View all HP NetServer LH 3000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 5 highlights
1 Introduction This document describes how to mount an HP NetServer LPr into a Compaq® model 4000- or 7000-series rack enclosure. Refer to the HP NetServer LPr Installation Guide that came with the NetServer for instructions on adding accessories to and configuring the NetServer. The HP NetServer LPr is shown in Figure 1-1. Figure 1-1. HP NetServer LPr WARNING To prevent the rack from tipping over and causing equipment damage or bodily injury, be sure that the stabilizing, anti-tip feature is installed on this rack enclosure (see Figure 1-2). WARNING To prevent the rack from tipping over and causing equipment damage or bodily injury, do not extend more than one piece of equipment at a time out of the front of the rack enclosure. Be sure that the stabilizing, anti-tip feature is installed on the rack enclosure in which you are installing the HP NetServer LPr. This feature consists of two "feet" 1