HP NetServer LH 3000 hp netserver lxr 8500 netraid-2m config guide for Micros - Page 3
Enclosure, Cables, Power distribution, Server, Network
View all HP NetServer LH 3000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 3 highlights
lxr8500nt2m Shared Storage Configuration Parameter Logical disks Configuration options Enclosure Disk drives Number of cabinets Model Status SCSI ID Disk SCSI IDs Cables SCSI Power distribution Layout Specification One per RAID array Eight, maximum, per cluster Cluster mode on Cache write policy to Write thru Any HP drive supported by storage enclosure. Any combination of HP disk models is allowed in an array, on a SCSI channel, or in a cluster. One or two per NetRAID-2M controller (up to four per cluster) HP Rack Storage/12 D5989B, containing two D6025B SCSI controller cards, or HP Rack Storage/12 D5989C, containing two D6025C SCSI controller cards 5 (fixed) 0-3, 8-15 (fixed) Any two HP LVD SCSI offset cables per RS/12 from the following list: 1 meter D7131A 2.5 meter D6020A 5 meter D6982A 10 meter D6983A See SCSI cabling diagram on page 5. Redundant power distribution units (PDUs) are recommended. See power cabling diagram on page 6. Microsoft® and HP Certified Server Configuration Parameter Server I/O controller Network interfaces Boot device Specification PCI slot 1, NetRAID-1M local storage controller PCI slot 7, NetRAID-2M shared storage controller PCI slot 3, intra-cluster (heartbeat) LAN PCI slot 9, client LAN NetRAID-1M Intra-Cluster (Heartbeat) LAN Configuration Parameter Network Connection NIC Quantity Specification HP D5954A crossover cable, or equivalent. The intra-cluster LAN may only be used for cluster node communication. It may not be used for client communication. One 2/23/02 3