HP NetServer LP 2000r HP Netserver LXr 8500 NetRAID-4M Config Guide for Windo - Page 1
HP NetServer LP 2000r Manual
View all HP NetServer LP 2000r manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 1 highlights
HP Netserver LXr 8500 with NetRAID-4M (HP Rack Storage/12) Windows NT® Server 4.0 Enterprise Edition Cluster Configuration Guide 6 June 2001 (see Versions at the end of this document) Introduction This document defines the configurations that Hewlett-Packard supports for the HP Netserver LXr 8500, HP Rack Storage/12 and Microsoft® Cluster Server. These configurations minimize single points of failure (SPOF) and provide extended availability. The specific configuration certified and supported by both Hewlett-Packard and Microsoft® is defined, as are other guidelines to assist you in configuring your clustered Netservers. This guide is prescriptive; it describes the configurations supported by HP. Any deviance to these configurations can result in an inoperative cluster or an operating cluster with degraded performance, hidden SPOFs, etc., and therefore will not be supported by HP. What's Defined in a Cluster •Cluster •SPUs •Local and Shared Storage •Intra-cluster and Client LANs •Shared Storage Cabling Cluster Type of SPUs Number of nodes Shared Storage LANs: Client LAN Intra-cluster (Heartbeat) LAN Power source HP Netserver LXr 8500 Each node must be the same SPU, but may have different clocks speeds, main memory sizes, cache sizes, and number of CPUs. 2 HP Rack Storage/12 with HP NetRAID-4M controller and HP disks. See Shared Storage below. Any NIC that is HP and Microsoft® approved. See Client LAN below. HP D5013B with crossover cable or equivalent. See Intra-cluster LAN below. Direct from power mains, power conditioner or uninterruptible power 1