HP NetServer LXr 8500 HP Netserver Ultra3 SCSI HBA Guide - Page 60
Installing the Driver When NetWare is Already, Installed
View all HP NetServer LXr 8500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 60 highlights
NOTE This will assign the CD-ROM to the next available drive letter, typically D if there is only one DOS drive. If you are using MS-DOS 5.0 and do not already have mscdex.exe, you will need to either upgrade to MS-DOS 6.0 or above, or download mscdex.exe from Microsoft BBS or CompuServe forum. 4. Reboot your system. You are now able to access your CD-ROM drive from the command line and from Windows. Installing the Driver When NetWare is Already Installed To update or install the adpt160m.ham driver when NetWare is already installed, follow the instructions in this section. The procedures are similar for all versions of NetWare. Procedures that are specific to a NetWare version are noted when necessary. 1. Make a backup copy of the old driver (if it exists) before installing the new driver. 2. Copy the adpt160m.ham driver from the HP Ultra3 Family Manager Set disk for NetWare into the server's startup directory (e.g., c:\nwserver, c:\server.40) on your hard disk. This overwrites any existing version of the driver in the directory. NOTE For NetWare 3.12/3.2 and 4.12/4.2, the file is in \netware. For NetWare 5.0, the file is in \netware\v5_xx. 3. If necessary, modify the load command line in the startup.ncf file so that the proper path to the driver and all appropriate command line options are specified. See "Loading the Driver at Server Bootup" on page 55. The correct syntax to load the Ultra3 Family driver is load [pathname]adpt160m [options]. Command line options are not case sensitive. Placing commas between command line options is optional. See "Loading the Driver at Server Bootup" on page 55 for possible values. 54