HP Nx7300 Drives - Windows Vista - Page 14
Removing an optical disc (with power)
UPC - 808736788502
View all HP Nx7300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
Optical drives (select models only) Removing an optical disc (with power) If the computer is running on external or battery power: 1. Turn on the computer. 2. Press the release button 1 on the drive bezel to release the media tray, and then pull out the tray 2. 3. Remove the disc 3 from the tray by gently pressing down on the spindle while lifting the outer edges of the disc. Hold the disk by the edges and avoid touching the flat surfaces. ✎ If the media tray is not fully accessible, tilt the disc carefully as you remove it. 4. Close the media tray and place the disc in a protective case. 4-4 Drives
4–4
Drives
Optical drives (select models only)
Removing an optical disc (with power)
If the computer is running on external or battery power:
1. Turn on the computer.
2. Press the release button
1
on the drive bezel to release the
media tray, and then pull out the tray
2
.
3. Remove the disc
3
from the tray by gently pressing down on
the spindle while lifting the outer edges of the disc. Hold the
disk by the edges and avoid touching the flat surfaces.
✎
If the media tray is not fully accessible, tilt the disc carefully
as you remove it.
4. Close the media tray and place the disc in a protective case.