HP OMEN 15-dc1000 OMEN by Laptop PC Maintenance and Service Guide - Page 51
SSD (M.2), Remove the SSD
View all HP OMEN 15-dc1000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 51 highlights
SSD (M.2) Description Generic SSD 128 GB 2280 M2 SATA-3 Value TL Generic SSD 256 GB 2280 M2 PCIe 3x4SS NVMe TLC TL Generic SSD 512 GB 2280 M2 PCIe3x4SS NVMe TLC TL, not for products with AMD Radeon hybrid graphics Spare part number 827560-027 847109-008 847110-007 Before removing the SSD, follow these steps: 1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect the power from the computer by unplugging the power cord from the computer. 3. Disconnect all external devices from the computer. 4. Remove the base enclosure (see Base enclosure on page 32). 5. Disconnect the battery (see Battery on page 34). Remove the SSD: 1. Remove the Phillips M2.0 x 2.5 screw (1) that secures the SSD to the system board. 2. Remove the SSD (2) by pulling the drive away from the slot at an angle. Reverse this procedure to install the SSD. Component replacement procedures 41