HP OMEN 25 Maintenance and Service Guide - Page 13
Removal and replacement procedures, Preparation for disassembly, RC
View all HP OMEN 25 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
4 Removal and replacement procedures Adherence to these procedures and precautions is essential for proper service. Preparation for disassembly Use this information to properly prepare to disassemble and reassemble the monitor. 1) Read the "Important safety information" and "Important service information and precautions" sections in the "Getting started" chapter of this guide. 2) Clean the room for disassembly. 3) Identify the disassembly area. 4) Check the position that the monitors are to be placed along with the number of monitors. Prepare the area for material flow according to the disassembly layout. 5) Be sure to have the following equipment and materials: • Press fixture • Working table • Screwdriver • Knife • Gloves • Cleaning cloth • ESD protection • Scraper bar in the following dimensions: RC Before removing the RC, follow these steps: ▲ Prepare the monitor for disassembly. See Preparation for disassembly on page 9. Remove the RC: 9