HP Officejet t45 HP OfficeJet T Series All-in-One - (English) Quick Setup Shee - Page 1

HP OfficeJet T Series Quick Setup Sheet for U.S. and Canada 1Unpack your HP OfficeJet. 2 Install paper trays. 3 Load blank paper. a b c 4 Insert print cartridges. a b Push the tray in fully. Remove packing tape first. 5 Plug in the phone/fax connector. Make sure power is not connected. c d Arrow goes on top. Remove the cardboard insert. Insert both the black and color cartridges. Snap firmly into place. Connect your HP OfficeJet to a telephone wall jack. 6 Connect your office equipment. If you will not connect other office equipment to the same line as your HP OfficeJet, skip this step. PC Answering Machine (or external modem) • Use this diagram if you connect other office equipment to the same phone line as your HP OfficeJet. Cross off any equipment you won't connect. • Remove one or both plastic tabs from the phone/fax connector. • If you connect a PC modem, turn off its faxreceive feature. • Refer to your User 's Guide for information on touch-tone versus rotary pulse dialing and on special features such as distinctive ring or voice mail service through your phone company. 7 Connect printer cable. If you will not connect to a PC, skip this step. a b Connect a bidirectional parallel cable (IEEE-1284 compliant) directly to your PC. Do not use any intermediary devices such as a switchbox. c Shut down Windows and turn off your PC. Lock the clips. Tighten the screws. Turn PC on and let it boot up fully. 8 Turn on your HP OfficeJet. Turn your HP OfficeJet on. 9 Select your country and language. United States users please skip this step. a Select your country from the list. Press 3 for Canada 3 Canada 1=Yes, 2=No 1 b Select your language. Press 1 for English 1 English 1=Yes, 2=No 1 10 Align print cartridges. a Press Enter to Align Print Cartridges b Your HP OfficeJet prints an alignment test page. Follow the instructions on the page. Turn page over for additional setup.