HP OmniBook 3000 HP OmniBook 3000 - Reference Guide - Page 24
System Devices Menu continued, Default, Security Menu
View all HP OmniBook 3000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 24 highlights
Setting Up the OmniBook Configuring the OmniBook System Devices Menu (continued) Audio Sets how the audio system is configured: by the BIOS (specified or automatic) or by a PnP operating system. SB I/O address* Sets the Sound Blaster I/O address. WSS I/O address* Sets the Windows Sound System I/O address. AdLib I/O address* Sets the AdLib synthesizer I/O address. Interrupt* Sets the interrupt. 1st DMA channel* Sets the DMA channel for playback. 2nd DMA channel* Sets the DMA channel for recording. MPU Device Sets how the MIDI capability is configured: by the BIOS (specified or automatic) or by a PnP operating system. The port replicator provides a MIDI port, but not the OmniBook. MPU I/O address* Sets the MIDI I/O address. Interrupt* Sets the interrupt. Default Enabled 220h 530h 388h IRQ5 DMA1 DMA0 Disabled 330h IRQ9 Security Menu System Password is Set System Password Password on Boot Password on Resume* Default Shows whether a password is set. Clear Press ENTER to set, change, or clear the password and save all Setup changes. (Up to 8 alphanumeric keys, prefix keys ignored.) Sets whether the password is required to boot. Disabled Sets whether the password is required to continue after Suspend and Hibernate. Disabled 2-8