HP OmniBook 5500 HP OmniBook Hardware Diagnostics - Page 33
Batch Tests
View all HP OmniBook 5500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 33 highlights
Advanced System Tests Batch Tests Batch Tests You can use the batch test facility to run a pre-defined suite of advanced tests. Each test in the batch is initiated automatically. Help on Using Batch Tests • For help on how to use the batch facility, select the command Batch Help in the Batch menu. • For help on selecting tests, choose the Edit Batch - Test Selection commands in the Batch menu. How to Run a Batch Test First, you must configure the batch test. To do this, use the Edit Batch submenu in the Batch menu. The Edit Batch submenu has these commands: • Test Selection: for help on how to select the tests for the batch. • Test Parameters: to configure the test parameters. • Repeat Count: to set the number of times each test is run, from 0 (do not run test), to 1 (run test once), or more. Hint To select or deselect any test from the current batch test, use the spacebar to check or uncheck it. To run the batch test you have configured, select the Run Batch command in the Batch menu. The Batch menu also contains these commands: • Save Batch: to save the current batch test (with current settings). • Load Batch: to load a previously saved batch test. • Batch Help: for help on using the batch facility. Note You cannot change the order in which the tests are performed. You can abort a batch test while it is running by pressing ESC. 4-6