HP OmniBook XE2-DB HP OmniBook XE Port Replicators User's Guide - 5969-2851 - Page 14

International Products sold internationally by Hewlett-Packard and its authorized dealers meet the specifications listed below. Address: Product name: Options: Safety: EMC: Supplementary Information: Declaration of Conformity (according to ISO/IEC Guide 22 and EN 45014) Hewlett-Packard Company Mobile Computing Division 19310 Pruneridge Ave. Cupertino, CA 95014, USA declares that the following product HP Port Replicator (F1738A) All conforms to the following product specifications IEC 950:1991+A1,A2,A3,A4 / EN 60950 (1992)+A1,A2,A3,A4,A11 GB4943-1995 CISPR 22:1993+A1,A2 / EN 55022 (1994)+A1,A2: Class B [1 ] GB9254-1988 EN 50082-1:1992 IEC 801-2:1991 / prEN 55024-2 (1992): 4kV CD, 8kV AD IEC 801-3:1984 / prEN 55024-3 (1991): 3V/m IEC 801-4:1988 / prEN 55024-4 (1992): 0.5 kV signal lines, 1.0kV power lines FCC Title 47 CFR, Part 15 Class B Ansi C63.4:1992 AS/NZS 3548:1995 Rules and Regulations of Class B The product herewith complies with the requirements of the EMC Directive 89/336/EEC and carries the CE mark accordingly. This device complies with Part 15 of FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. The HP F1454A AC adapter used with this product is designed to operate on all power systems, other than IT power systems. [1] The product was tested in a typical configuration with Hewlett-Packard personal computer peripherals. Quality Department, Hewlett-Packard Company Mobile Computing Division 12 HP Port Replicator