HP OmniBook XE2-DE HP OmniBook XE Series - Modem AT Commands - Page 3

ECC Commands, MNP 10 Commands, FAX Class 1, W-Class Commands, AT*Commends, Data Calling tone - memory

Get HP OmniBook XE2-DE - Notebook PC PDF manuals and user guides View all HP OmniBook XE2-DE manuals
Add to My Manuals
Save this manual to your list of manuals

Page 3 highlights

DTE \K4,5 Send a break with received data to the DTE \N0 Select normal speed buffered mode \N1 Select direct mode \N2 Select reliable link mode \N3 Select auto reliable mode \N4 Force LAPM mode \N5 Force MNP mode \V0 Connect messages are controlled \V1 Connect messages are displayed in the by the command settings X, W, and S95 single line format +MS Select modulation +H0 Disable Rockwell Protocol Interface (RPI) +H1 Enable RPI and set DTE speed to /Video ready mode 19200 bps +H2 Enable RPI and set DTE speed to 38400 bps +H3 Enable RPI and set DTE speed to +H11 Enable RPI+ mode 57600 bps +H16 Enable Video Ready mode **0 Download to flash memory at last **1 Download to flash memory at 38.4 kbps sensed speed **2 Download to flash memory at 57.6 kbps -SDR=0 Disable distinctive ring -SDR=1 Enable distinctive ring type 1 -SDR=2 Enable distinctive ring type 2 -SDR=3 Enable distinctive ring type 1 and 2 -SDR=4 Enable distinctive ring type 3 -SDR=5 Enable distinctive ring type 1 and 3 -SDR=6 Enable distinctive ring type 2 and 3 -SDR=7 Enable distinctive ring type 1, 2 and 3 ECC Commands %C0 Disable data compression %C2 Enable V.42 bis data compression %C1 %C3 \A0 Set maximum block size in MNP to 64 \A1 \A2 Set maximum block size in MNP to 192\A3 \Bn Send break of n x 100 ms Enable MNP 5 data compression Enable both V.42 bis and MNP 5 compression Set maximum block size in MNP to 128 Set maximum block size in MNP to 256 MNP 10 Commands -K0 Disable MNP 10 extended services -K1 Enable MNP 10 extended services -K2 Disable MNP 10 extended services -SEC=0 Disable MNP 10-EC detection only -SEC=1, [] Enable MNP 10-EC and set transmit level 0 to 30 (0 dBm to -30 dBm) FAX Class 1 +Fclass=1 Service class +FAE=1 Enable data/fax auto answer +FRM=n Receive data +FTH=n Transmit data with HDLC framing +FTS=n Stop transmission and wait, nx10 ms +FAE=0 Disable data/fax auto answer +FRH=n Receive data with HDLC framing +FRS=n Receive silence, nx10 ms +FTM=n Transmit data W-Class Commands AT*Commends *B Display Blacklisted Number *Cn Data Calling tone (1300hz)selection *NC Country select *NCn Code(n) Country

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
DTE
\K4,5
Send a break with received data to the
DTE
\N0
Select normal speed buffered mode
\N1
Select direct mode
\N2
Select reliable link mode
\N3
Select auto reliable mode
\N4
Force LAPM mode
\N5
Force MNP mode
\V0
Connect messages are controlled
\V1
Connect messages are displayed in the
by the command settings X, W, and S95
single line format
+MS
Select modulation
+H0
Disable Rockwell Protocol Interface
(RPI)
+H1
Enable RPI and set DTE speed to
/Video ready mode
19200 bps
+H2
Enable RPI and set DTE speed to 38400 bps
+H3
Enable RPI and set DTE speed to
+H11
Enable RPI+ mode
57600 bps
+H16
Enable Video Ready mode
**0
Download to flash memory at last
**1
Download to flash memory at 38.4 kbps
sensed speed
**2
Download to flash memory at 57.6 kbps
-SDR=0
Disable distinctive ring
-SDR=1
Enable distinctive ring type 1
-SDR=2
Enable distinctive ring type 2
-SDR=3
Enable distinctive ring type 1 and 2
-SDR=4
Enable distinctive ring type 3
-SDR=5
Enable distinctive ring type 1 and 3
-SDR=6
Enable distinctive ring type 2 and 3
-SDR=7
Enable distinctive ring type 1, 2 and 3
ECC Commands
%C0
Disable data compression
%C1
Enable MNP 5 data compression
%C2
Enable V.42 bis data compression
%C3
Enable both V.42 bis and MNP 5
compression
\A0
Set maximum block size in MNP to 64
\A1
Set maximum block size in MNP to 128
\A2
Set maximum block size in MNP to 192\A3
Set maximum block size in MNP to 256
\Bn
Send break of n x 100 ms
MNP 10 Commands
-K0
Disable MNP 10 extended services
-K1
Enable MNP 10 extended services
-K2
Disable MNP 10 extended services
-SEC=0
Disable MNP 10-EC
detection only
-SEC=1, [<tx level>] Enable MNP 10-EC and set transmit level<tx level> 0 to 30 (0 dBm to -30 dBm)
FAX Class 1
+Fclass=1 Service class
+FAE=0
Disable data/fax auto answer
+FAE=1
Enable data/fax auto answer
+FRH=n
Receive data with HDLC framing
+FRM=n
Receive data
+FRS=n
Receive silence, nx10 ms
+FTH=n
Transmit data with HDLC framing
+FTM=n
Transmit data
+FTS=n
Stop transmission and wait, nx10 ms
W-Class Commands
AT*Commends
*B
Display Blacklisted Number
*Cn
Data Calling tone (1300hz)selection
*NC
Country select
*NCn
Code(n)
Country