HP OmniBook xe4500 HP Omnibook xe4100 and xe4500 Series Notebook PCs - Corpora - Page 92
To remove a RAM expansion module
View all HP OmniBook xe4500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 92 highlights
CAUTION Add-On Devices Installing Additional RAM 5. Replace the cover. 6. Insert the battery. To remove a RAM expansion module You may want to remove a RAM module so you can install a larger one. You'll need a small Phillips screwdriver for these steps. Your computer's chips are extremely sensitive to static electricity, and can be permanently damaged by it. Handle the RAM module only by its edges. Before installing the memory module, discharge your body's static electricity by touching the metal shielding around the connectors on the back of the computer. 1. Click Start, Turn Off Computer, Turn Off (Windows XP) or Start, Shut Down, Shut down (Windows 2000). 2. Important: unplug the AC adapter, if present, and remove the battery. 3. Turn the unit bottom-side up, loosen the screws holding the RAM cover, and remove the cover. 4. Release the two latches at the sides of the RAM board, so the free edge of the board pops up. 5. Pull the board out of the connector. 6. Replace the cover. 7. Insert the battery. 92 Corporate Evaluator's Guide