HP P Class 450/500/550/600/650/700/750 ELSA Synergy II/GLoria II user's guide - Page 14
Important Safety Instructions
View all HP P Class 450/500/550/600/650/700/750 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
ELSA SYNERGY II and GLoria II Graphics Cards Introduction Important Safety Instructions WARNING If you have any doubt that you can lift the HP VISUALIZE Personal Workstation or display safely, do not try to move it without help. For your safety, always connect the equipment to a grounded wall outlet. Always use a power cord with a properly grounded plug, such as the one provided with this equipment, or one in compliance with your national regulations. This HP VISUALIZE Personal Workstation is disconnected from the power by removing the power cord from the power outlet. This means the Personal Workstation must be located close to a power outlet that is easily accessible. For your safety, NEVER remove the HP VISUALIZE Personal Workstation's cover without first removing the power cord from the power outlet, and any connection to the telecommunications network. Always replace the cover on the Personal Workstation before switching it on. The power cord should be the last item to be re-connected after re-assembly. Failure to follow these instructions results in the risk of electrical and/or mechanical hazards during the operation. To avoid electric shocks, do not open the power supply. There are no user-serviceable parts inside. This HP VISUALIZE Personal Workstation is a Class 1 laser product. Do not attempt to make any adjustment to the laser units. Before handling the ELSA graphics cards first wait until the card has cooled down completely before touching it. The card can become very hot during use. CAUTION Static electricity can damage electronic components. Therefore, anytime you handle an accessory such as the ELSA Synergy II or GLoria II card, you should use an electrostatic grounding strap. You should turn all equipment OFF. Do not let your clothes touch the accessory. To equalize the static electricity, rest the antistatic bag on top of the Personal Workstation while you are removing the accessory from the bag. You should also handle the accessory as little as possible and with care. 14 Chapter 1