HP P10000 HP P10000 3PAR Storage System Physical Planning Manual (QL226-96013, - Page 11
Power and Heat Specifications, Table 4 V400/V800 Storage System Capacity Specifications - 3par v400
View all HP P10000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
Table 4 V400/V800 Storage System Capacity Specifications (continued) Feature 10 GB /s iSCSI Host Ports Fibre Channel host ports (four-port adapters)1 V400 0-8 with 2 nodes 0-16 with 4 nodes 0-48 (2 node) 0-96 (4 node) V800 0-8 with 2 nodes 0-16 with 4 nodes 0-32 with 8 nodes 0-48 (2 node) 0-96 (4 node) 0-144 (6 node) 0-192 (8 node) iSCSI host ports Number of drives 1 Raw capacity (approx.) 1 0-16 10 Gb/s 16-960 2.3-800 TB 0-32 10 Gb/s 16-1,920 2.3-1600 TB Architectural maximum number of drives RAID levels RAID 5 data to parity ratios Drive capacities (GB's approx.)1 Number of drive chassis2 3,200 6,400 RAID 0, 1, 5, 6, 10, 50 RAID 0, 1, 5, 6, 10, 50 2:1 - 8:1 2:1 - 8:1 300 GB 15K FC, 600 GB 15K FC, 2 300 GB 15K FC, 600 GB 15K FC, 2 TB NL, 100 GB SSD, 200 GB SSD TB NL, 100 GB SSD, 200 GB SSD DC4 2-24 2-48 Energy consumption efficiency3 0.053 0.053 1 Levels, ratios, and capacities all mixable within the same storage server. 1 GB=1,000,000,000 bytes. 2 A single drive chassis holds up to 40 drives in 4U of space within an EIA-standard rack. 3 Japan Green Law statement of compliance: The energy consumption efficiency value has been calculated per requirements for Category-G Magnetic Disk Drive Units by dividing the power consumption, measured according to the definition in the Law Concerning the Rational Use of Energy, by the storage capacity defined in the Energy Conservation Law. The efficiency value is based on a host-maximized V800 configuration using 600GB drives. Power and Heat Specifications The following table lists the electrical power requirements for the HP P10000 3PAR Storage Systems. Table 5 HP P10000 3PAR Storage System Power Requirements per Cabinet 2 Meter Cabinet Max. Watts per Cabinet (fully populated) 9,9841 Max. BTUs/hour per cabinet (fully 34,075 populated) Input Voltage (VAC) 200 - 240 Frequency (Hz) 50 - 60 Circuit Breaker Max 30A per PDU (de-rated to 24A) Drive Chassis (no magazines) 200 Power Connectors Node Pair (fully populated) (4) L6-30P Plug (North America and Japan) (4) IEC-60309 Plug (EU and Korea) Transactional2 Watts 705 BTUs/hour (fully populated) 2,406 Idle 630 2,150 Power and Heat Specifications 11